The latest in Vinten’s next generation of heads, the FHR-145, demonstrates the future of broadcast robotics. The exceptional performance of the head stays true to the Vinten brand and provides operators with the highest quality broadcast output.
The FHR-145 is the latest head to incorporate Vinten’s Intelligent Control Engineering (ICE), a forward-thinking technology that delivers unprecedented control and accuracy in an innovative and highly compact form.
Broadcasters can have total confidence in the head’s capabilities, as ICE will deliver remarkable accuracy and repeatability at high and low speeds using an ultra-reliable ethernet communications protocol.
Designed to support typical camera and lens packages up to 66kg/145lbs, the FHR-145 provides broadcasters with the ultimate flexible yet simple solution. Easy to set up, operate and service, every element of the versatile head has been engineered with the user in mind.
Key Features and Benefits
- Smooth camera motion control making use of high resolution absolute encoders and delivering accuracy of +/-0.03 degrees
- Ultimate user friendly aesthetics and ergonomics including tilt lock for added security, and a re-configurable mounting cradle to suit a wide range of camera, lens and accessory payloads
- No external PSU or lens drives
H: 500 L: 440 D: 245
|Weight||23.4Kg, cradle 2.9Kg|
|Pan Range||720 deg (No end stops)|
|Tilt Range||100 deg (+/- 50 deg)|
|Payload||66Kg / 145lbs|
|Rated load inertia||7.5Kgm2|
|Speed||0.01 - 60deg/sec|
|Maximum acceleration||60 deg /sec^2|
|Position resolution||22 Bit|
|Repeatability||<0.03 deg, 2 mins of arc|
|Pan encoder||> 2 mil counts / rev|
|Tilt encoder||> 2 mil counts / rev|
indoor: 5-50deg 90%
humidity non condensing
Storage: -40-60 deg
|Movement on start up||None|
100-240V ac 50.60Hz
Neutric "True 1" Power input
Unfused power output using
Neutric "True 1" outlet
|GPIO Lens||D-type for digital, zoom and focus|
|Indication||Power, communications & VR data|
on/off switch (brightness of light
can be adjusted)
|Profile Control interfaces||
Fusion VRC, FCS16 and LCS.
Own interface to setup and
All Fujinon and Canon full
|Tilt lock on top of unit||Software indication of lock on|
|Cable restraint Mounting||4 bolt Mitchel fixing, Quickfix|
Limits, feedback on shot status,
GPIO, position, save data to transfer
to another head, error reporting